Garage door springs help in lowering and lifting your garage doors. When they are installed properly and well adjusted, the springs do the job of opening and closing your garage door whether your garage door is manually or automatically operated.

Garage door springs are of two types; the torsion springs used in the rollaway door type and extension springs that are used with the swing up door. Garage door extension springs are mounted one on either side of the track for lighter doors. Garage door torsion springs are mounted on a fixed metal shaft, which is above the garage doorframe and used for heavy doors.

Sometimes one spring can get worn out in a garage door. Garage door spring replacement must however, be done as a set, replacing both springs. This is because it is likely that the other spring might wear out in a short time. There are times when the spring just snaps making the door fall and this is why both garage door springs replacement must be done at the same time.

The type of springs on your garage door will help you determine how to adjust the garage door spring. Side mounted springs are adjusted when your doors are open. To adjust garage door torsion spring, the door must be closed. Some garage door torsion springs can be adjusted by using a special adapter and electric drill.

A garage door spring install must preferably done by a qualified professional. Rather than trying to figure out how to install a garage door spring, especially torsion springs; it is better to get your technician to handle it with the right tools as it is a risky job. If you are attempting to replace an extension spring, ensure that you read the garage door spring replacement instructions from the manufacturer thoroughly.

Roll up garage door spring replacement for overhead garage doors are available complete with all the hardware and accessories required to carry out the replacement. Garage door replacement springs are widely available but the part where the mechanism is positioned is under high tension and therefore, must be handled with care.

In Palm Coast, Florida the garage door springs dealer must ensure installation of the garage door complies with The Florida Building Code, which has specific design pressure requirement for garage doors. Coastal area garage doors must be storm resistant. Retrofit kits are available for repairing garage doors and this can be cheaper than replacing the door itself.